stainless steel coil stainless steel sheet / plate stainless steel angle stainless flat bar No.4 / HL / BA / Checkered plate stainless steel decoration round pipe stainless steel seamless pipe stainless steel square pipe stainless steel rectangular pipe stainless steel channel

stainless steel sheet / plate

310S stainless steel sheet

About 310S materail:

310S stainless steel is austenitic chrome-nickel stainless steel, 310S stainless steel with good oxidation resistance,Corrosive, because a higher percentage of chromium and nickel, so has much better creep strength at high temperature continuous operation, has good temperature resistance. Because of nickel (Ni), chromium (Cr) content is high, with good resistance to oxidation, corrosion, acid and alkali, high temperature performance, high temperature steel pipe dedicated to the manufacture of electric furnace and other occasions, austenitic stainless steel increased carbon after content, because of its solid solution strengthening effect of the strength is improved, the chemical composition of austenitic stainless steel is based on chromium, nickel-based add molybdenum, tungsten, niobium and titanium and other elements, because of its organization for the face-centered cubic structure, thus high strength at elevated temperatures and creep strength. Melting point 1470 ℃, 800 ℃ begins to soften, allowable stress continues to decrease.310S SS is Widely used in stamping dies, jigs, tools, gauges, cutter, auxiliary tools.


The advantage for 310S material

Good oxidation resistance;

The use of a wide range of temperature (1150 DEG C);

No magnetism in solid solution state;

High temperature strength;

Good welding ability.

310S material is widely used in The exhaust pipe, steel pipe, heat treatment furnace, heat exchanger, incinerators and other requirements of heat resistance, high heat / high temperature contact parts.


310S Chemical compostion

C(%)Si(%)Mn(%)Cr(%)P(%)S(%)N(%)Ni(%)Cu(%)
≤0.08≤1.00≤2.0024.0-26.0≤0.03≤0.03'---19.0-22.0'---

310S Mechanical property

tensile strength
(Mpa)
Yield Strength
(Mpa)
Elongation
(%)
rate of reduction in area
(%)
Density
(g/cm3)
52020550-60507.98

Specification for 310S SS grade

310S stainless steel austenitic chromium nickel stainless steel has good oxidation resistance, corrosion resistance, because the higher percentage of chromium and nickel, which has much better creep strength, can continuously work under high temperature, good heat resistance.

For Ni (Ni), chromium (Cr) content is high, with good oxidation resistance, corrosion resistance, acid and alkali resistance, high temperature performance, high temperature resistant steel dedicated to the manufacture of electric furnace tube and so on, increase the amount of carbon austenitic stainless steel, due to the solid solution strengthening effect to the strength improved, chemical composition characteristics of austenitic stainless steel is chrome, nickel based addition of molybdenum and tungsten, niobium and titanium elements, as its face centered cubic structure, and strength and high creep strength at high temperature.

TechnicalThicknessWidthFinishStatus
Cold rolled0.40mm-3.00mmStandard width in China:
1000mm 1219mm 1500mm
Special width:
Based on customer's require.
2B / BA /No.4 / HL 
Mirro etc
sheet / plate / coil 
strip
Hot rolled3.00mm-80.0mm 
Standard width in China:
1240mm 1500mm 
Special width:
Based on customer's require.
No.1 plate / coil

Online Inquiry:
Related products
310S hot rolled stainless steel plate More>>
316L hot rolled stainelss steel plate More>>
304/304L cold rolled stainless steel sheet More>>
304/304L hot rolled stainless steel plate More>>
316L stainless steel sheet More>>
321 hot rolled stainless steel plate More>>
321 stainless steel sheet More>>