stainless steel coil stainless steel sheet / plate stainless steel angle stainless flat bar No.4 / HL / BA / Checkered plate stainless steel decoration round pipe stainless steel seamless pipe stainless steel square pipe stainless steel rectangular pipe stainless steel channel

stainless steel coil

316L stainless steel coil

About 316L material:

316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on. Sea equipment, chemicals, dyes, paper, oxalic acid, fertilizer and other production equipment; photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts. 

316L SS is Widely used pipes, heat exchangers, food industry, chemical industry, watch industry, etc


316L Chemical compostion

C(%)Si(%)Mn(%)Cr(%)P(%)S(%)Mu(%)Ni(%)Cu(%)
≤0.04≤1.0≤2.0016.0-18.0≤0.045≤0.032.0-3.010.0-14.0'---

316L Mechanical property

抗拉强度(Mpa)
tensile strength
屈服强度(Mpa)
Yield Strength
伸长率(%)
Elongation
断面收缩率(%)
rate of reduction in area
密度(g/cm3)
Density
≥480≥177≥40≥607.98

Specification for 316L SS grade

TechnicalThicknessWidthFinishStatus
Cold rolled0.40mm-6.00mmStandard width in China:
1000mm 1219mm 1500mm
Special width:
Based on customer's require.
2B  /No.4 / HL 
Mirro etc
sheet / plate / coil 
strip
Hot rolled3.00mm-80.00mm 
or more thick
Standard width in China:
1219mm 1500mm 1800mm 2000mm
Special width:
Based on customer's require.
No.1 plate / coil

316L stainless steel has good weldability. All standard welding methods can be used for welding. Welding can be used, respectively, using 316Cb, 316L or 309Cb stainless 

steel filler rods or electrodes for welding. In order to obtain the best corrosion resistance, the welding section of 316 stainless steel should be annealed after welding. If 316L

 stainless steel is used, no post annealing treatment is required.

 

Advantage for 316L material

1 cold rolling product appearance gloss good, beautiful;

2) due to the addition of Mo, corrosion resistance, especially pitting corrosion resistance;

3) high temperature strength

4) excellent work hardening (after processing weak magnetic)

5) solid solution state;

6) relative to 304 stainless steel, higher prices.But with better physical property.



Online Inquiry:
Related products
321 stainless steel coil More>>
310S cold tolled stainless steel coil More>>
304 / 304L stainless steel coil More>>